Plumbing services include a variety of tasks like cleaning pipes, fixing broken drains and installing a toilet or bathtub. Attending to your plumbing problems immediately will save you from any major damages. Be it a small leak, emergency plumbing repair or regular plumbing maintenance, we highly recommend you hire a professional plumber in Toronto. They have all the proper equipment to fix any plumbing issue and the expertise to install any new plumbing parts.
In this cost guide, you can learn average, lowest and highest reported costs for various plumbing services in Toronto and different factors which impact these costs. A plumber’s fees are based on the type and complexity of the job. This cost guide is based on 432 verified Toronto homeowner reviews on HomeStars. You can use this cost guide as a reference to create an estimate for your next plumbing job or get a custom quote from a local plumber.
Cost to Hire a Plumber in Toronto
| Task | Average Cost* | Lowest Reported* | Highest Reported* |
|---|---|---|---|
| Bathtub Installation | $2,050 | $500 | $5,000 |
| Blocked Drain | $1,321 | $100 | $15,000 |
| Faucet Repair and Installation | $490 | $136 | $2,500 |
| Fix a Leak | $472 | $160 | $950 |
| Repair Lead Pipes | $2,970 | $1,700 | $9,000 |
| Sewer Backup Valve | $6,087 | $2,200 | $11,000 |
| Shower Installation | $6,901 | $500 | $50,000 |
| Sump Pump Installation | $5,542 | $500 | $26,000 |
| Toilet Repair | $491 | $100 | $12,002 |
| Water Filter | $950 | $115 | $8,000 |
| Water Heater Installation | $3,121 | $100 | $11,000 |
| Water Heater Repair | $576 | $120 | $2,200 |
| Water Main Leakage | $4,738 | $360 | $32,000 |
| Water Purification | $616 | $150 | $1,550 |
Costs as of October 2020*
Bathtub Installation
- Whether you are replacing an old bathtub or just renovated your bathroom and want to install a new one, a professional plumber can help you in either task. Once you decide the model and type of bathtub, the process becomes easier.
- When you hire a plumber, make sure you discuss the details of the bathtub with them. Tell them the type and size of the bathtub to be installed. It’s important to hire a professional plumber to avoid any damages to the floor and walls, prevent any leaks and fixture damages.
- A plumber can also fix any pre-existing problems with your bathtub by doing thorough maintenance. These problems may include waterproofing, clearing growing mould and cleaning clogged drains.
- Bathtub installation is a huge task. Based on its size, your bathroom’s location and other pre-existing conditions, it may take up to 6-9 hours to install a bathtub. A professional plumber may charge you $2,050 on average to install a bathtub in Toronto.
Blocked Drain
- A blocked drain in your kitchen or bathroom can cause water pools, noxious smells and damages to the water pipes. The faster you fix the blocked drain, the better it will be for your house.
- Leftovers and food particles stuck in your kitchen pipes can cause a blockage. Whereas a clogged toilet could be because of debris, non-flushable wipes and sanitary items. If the blockage is minor, it can be fixed by using some store-bought solutions to unclog the drain. But if it’s serious, we highly recommend you hire a plumber to avoid any damages.
- Based on the complexity of the clog, it may cost you $1,321 on average to unclog a drain.
Faucet Repair and Installation
- A damaged faucet or showerhead can cause water leaks and severe spikes in your water bills. If not fixed on time, it may cause further damage to the entire plumbing system of your house.
- Even if you’re planning to install a new faucet, you’ll need special plumbing equipment to make sure that the faucet has been installed tightly without any water leaks. Faucet repair and installation can cost you $490 on average.
Fix a Leak
- Any type of water leak, be it in your kitchen, bathroom or from an outside faucet, can be dangerous. Leaks create water puddles and these puddles can cause injuries or electrocution if mixed with electrical wires.
- It is important that you fix any such leaks as soon as possible. You can hire a plumber in Toronto to fix a water leak which can cost you anywhere from $160 to $950 based on the size of the problem.
Repair Lead Pipes
- To repair a leaking lead pipe, the plumber will cut the leaking part and replace it with a new one. If it’s a very old pipe, you can replace the whole system with the help of a plumber in Toronto.
- Replacing or repairing a lead pipe requires specific knowledge of the property structure, expertise in replacement material and special tools. A professional plumber may charge you up to $9,000 to repair or replace a lead pipe.
Sewer Backup Valve
- A sewer backup valve, also known as a backwater valve or backflow, is a valve designed to flow the sewage to the outside of your house. If there are heavy rains, the city’s sewer lines can cause the sewage water to flow back into your house, specifically in your basement. To avoid dirty water saturation in your basement, it’s always good to have a sewer backup valve. It will stop any reverse water flow and your basement from flooding.
- Hiring a professional and licensed plumber for this job can cost you $6,087 on average.
Shower Installation
- Having a shower in your bathroom is a necessity in any house. It’s important to install the shower with precautions to avoid any leakage and provide a healthy flow of water without damaging the bathroom wall.
- You can hire a shower installation specialist in Toronto who can also assist you in any other bathroom installations.
Sump Pump Installation
- Sump pumps are very important to avoid basement floods in Toronto. A sump pump is installed in the lowest point of a house’s basement. When the water reaches a certain height during flood seasons, the sump pump redirects the excess water to the storm drain outside the house.
- Installing or replacing a sump pump requires special tools along with a pump and thorough knowledge of installing it. If not done properly, it can quickly flood your basement and result in staggering damages. Installing or replacing a sump pump can cost you up to $26,000 in Toronto.
Toilet Repair
- It’s important that you don’t flush away your time and money trying to repair a toilet without any knowledge of how to do it. If your toilet tank is not filling properly, is making weird noises, is running constantly or is clogged, you need a toilet repair specialist.
A plumber in Toronto can fix your toilet within a few hours costing you $491 on average.
Water Filter
- Whether you want to repair, replace or service your water filter system, we recommend you hire a professional plumber in Toronto. Based on the type of system and damage a plumber may charge you $950 on average to fix your water filter.
Water Heater Installation
- Water heaters are a necessity for any Toronto home. A constant supply of hot water for your kitchen and bathroom can make your winter bearable. Whether you want to install a water heater, replace an old one or repair an existing machine, you can hire a qualified plumber to help you with the project.
Water Main Leakage
- A water main is a plumbing line that connects your house to a public water supply system. The water main leakage can flood your home and surrounding area resulting in major damages. To avoid high water bills and low-pressure water supply, we recommend you get the main leakage fixed as soon as you spot it.
Water Purification
- Water filters come in different types and shapes. You can choose a water filter for purification based on your requirements. Different types of filters include the whole house water filter, reverse osmosis system, under sink system, countertop and faucet minted systems.
- A plumber in Toronto can help you choose a system as per your needs and install it for you at a cost of up to $1,550.
Factors Impacting Plumber Costs in Toronto
Overhead Costs
- Before hiring a plumber, always ask for any extra material costs. If you are getting a faucet or pipe installed, the costs for such materials are added at the end as overhead costs.
- You can buy this extra material yourself or ask the plumber to buy it on your behalf. When asking for a cost estimate, make sure you enquire about the overhead costs.
Charging Methods
- Plumbers in Toronto can charge homeowners a flat rate to fix a plumbing problem or can charge per job. If you have multiple plumbing projects lined up, we recommend you hire a plumber on an hourly basis. If it’s a big project like installing a sump pump, then you should ask for a flat rate instead.
Additional Help
- Many times a plumbing issue can create a need for other specialists. Based on your project and the extent of damage, you may need to fix the drywall or get some electrical work done. In this case, you can hire a painter or electrician in Toronto along with a plumber. These additional services will cost you extra to complete the project.
To avoid any extra costs and damages associated with plumbing issues, we highly recommend you hire a plumber immediately after noticing a problem. You can easily hire a plumber on HomeStars by checking their Star Score, verification badge and homeowner reviews. You can ask a plumber to provide you with a custom quote for your next plumbing project.